+8615988969750
Home / News / Content

Apr 02, 2022

Application Method Of Paint Spray Gun

1. Add appropriate diluent to adjust the viscosity to the appropriate level. If it is too thick, the sprayed particles will be too thick. If it is too thin, it will be easy to sag and affect the next process.

2. It is best to control the air pressure to 0.3-0.4MPa. If the pressure is too small, the paint liquid will be poorly atomized, and the surface will be pitted. If the pressure is too large, it is easy to sag, and the paint mist is too large, which not only wastes materials but also affects the health of the operator.

3. The distance between the nozzle and the object surface is generally 200-300mm; if it is too close, it is easy to sag, and if it is too far, it is easy to get pitted, and if the nozzle is far away from the object surface, the paint scatters during painting, causing waste. The specific size of the distance should be based on the paint. The type, viscosity and air pressure can be adjusted appropriately.

4. The spray gun can be moved up and down, left and right, preferably at a speed of 20-30cm/s, and the nozzle should be sprayed straight on the surface of the object, and oblique spraying should be minimized.


Send Message