Automatic spray gun WRA-101/WRA-20 is HVLP automatic gun used by manipulator with low pressure and high performance,widely used in the industry because of its easy operation,uniform atomization, large spray width,fine particles and light weight, such as computer casings, mobile phone casings, cosmetics, furniture, hand tools, medicine, food, textiles,glass, plastic,rubber,printing,die-casting, building materials and other industries can be used.
1. Product Feature of low pressure Automatic gun WRA-101 and WRA-200:
Air intake adjustment and spray width adjustment are set outside the machine and equipment, which can be remotely operated and controlled independently to reduce the troubles in operation. It is designed with a return hole, and it is easy to clean the nozzle.
The air intake pressure can be adjusted freely according to your needs (2.5--3.0bar), reducing paint rebound, saving paint, slender atomization spray width, uniform atomization, large spray width, fine particles, excellent effect, spraying High efficiency and fast speed.
HVLP Automatic Spray Gun is suitable for a large number of coating applications, and can be installed in robotic arms or automatic coating machines.
There are a variety of nozzle diameters to choose from, which can be matched with a variety of spray caps, making it easy for you to use.
Nozzle and needle are made of stainless steel, suitable for spraying water-based paint
2.Product detai of Automatic Spray Gun WRA-101 and WRA-200:
Model No. : Automatic spray gun WRA-101
Pattern of Width : 190mm
Type of Feed : Pressure feed
Air Consumption : 270l/min
Compressor requested : 1.5kw
Paint Consumption : 150L/min
Application : Small object sprayging
Working Pressure : 2.2 bar
Painting Distance : 20mm
Fluid Tip : 0.8mm
Material : Alu-Alloy
Model No. : Automatic Spray Gun WRA-200
Pattern of Width : 400mm
Type of Feed : Pressure feed
Air Consumption : 530l/min
Compressor requested : 2.2-3.7kw
Paint Consumption : 500L/min
Application : Large object sprayging
Working Pressure : 2.7bar
Painting Distance : 250mm
Fluid Tip : 1.2 mm
Material : Alu-Alloy
3.WRA101 and WRA-200 inlet connection
CAP connection to air (controlling nebulization)
CYL connects air (controls the extension and retraction of the needle)
FAN connects the air to control the width of the spray width. The larger the air pressure, the wider the spray width, and the smaller the air pressure, the narrower the spray width.
The FLU is connected to the paint, the other side (the countersunk head screw is taken out) the inlet is the paint return)
4.Application of Low Pressure automatic gun WRA-101 and WRA-200
WRA-101/WRA-200 is a small automatic spray gun for matching with machines. Its caliber is: WRA-101 0.8mm, WRA-200 1.2 caliber, suitable for a large number of painting, can be installed in robotic arms or automatic painting equipment, suitable for furniture, Spraying of hardware, toys, building materials, hardware, plastics, rubber, medicine, textiles, glass, handicrafts, etc.
Automatic spray gun WRA-101 for robots is mainly used with reciprocating coating machines, coating robots, and manipulators, and is used for large-scale spraying of furniture, hardware, and automobiles.
5.Maintenance points of HVLP automatic spray gun WRA-101 and WRA-200
1.Always check whether the needle valve, gasket, and air valve gasket seal are leaking, and should be replaced in time if there is leakage; oil should be often applied to the sealing gasket to make it soft and facilitate sliding.
2.The thread of the air cap of the gun, the adjustment knob of the paint volume and the air adjustment knob, etc., should be oiled frequently to ensure flexible movement; the spring of the spray gun thimble and the air valve should also be lubricated to prevent rust and facilitate sliding.
3.Hvlp automatic gun WRA-200 should not be disassembled at will. When disassembly is necessary, it should be noted that the rectangular parts should not be stuck with garbage and paint. There should be absolutely no damage to the air cap and nozzle. After assembly, adjust it to the original state, and pull the trigger to test the air and paint. Spray effect.
4.Before using automatic spray gun WRA-101, a comprehensive inspection should be carried out to ensure that the spray gun is in good condition before it can be used.
5.The automatic spray gun WRA-200 should avoid hitting the coated object or falling to the ground during use, otherwise it will cause permanent damage and cannot be used.
6.When the work is suspended, the spray gun head should be immersed in the solvent to prevent the paint from drying and blocking the nozzle; but the entire spray gun should not be completely immersed in the solvent, which will damage the sealing gaskets of various parts and cause air leakage , The phenomenon of leaking paint.
7.The Low Pressure automatic spray gun WRA-101 should be cleaned in time after use, otherwise the paint channel will be blocked (especially 2K paint), and it will be difficult to clean in the future, or even unusable. After cleaning the spray gun, connect the paint pipe and the compressed air pipe for test spraying, and adjust the fan surface of the spray gun. The fan angle of the manual air spray gun is 70-80 degrees. If there is any problem, report it to maintenance in time.
6.About our factory:
Meco tools co,ltd has rich experience in spray gun manufacturing, providing pre-sales, in-sales and after-sales services. The company currently mainly produces high, medium and low pressure environmental protection spray guns and traditional high-quality spray guns.It is widely used in woodworking and furniture, automobile manufacturing and maintenance industries.
Our company has always been committed to technological improvement, and constantly develops new products to improve production efficiency and product quality.
The spray gun has been sold well at home and abroad since it was put on the market. It has won a high reputation in the industry and is welcomed and trusted by enterprises and distributors.We warmly welcomes your presence and cooperation
7.FAQ:
Q1: What is the regular MOQ for your product ?
A1: 1-10PCS is okay for this item
Q2: What’s your payment term?
A2: T/T, Western Union. Other payment terms also can be discussed based on our cooperation.
Q3: Delivery date ?
A3: Usually 7-15 after receiving deposit, specific delivery date based on order quantity.
Q4: How does your quality control ?
A4: We have professional QC term, control the quality during the mass production and inspect the completely packed goods.
