Suction-on paint spray gun: Suction-on paint spray gun uses high-speed airflow to partially vacuum the spray gun, thus generating suction to suck the paint from the pot to the nozzle for atomization and spraying, mainly for large-area spraying, the advantage is the mist of the paint It can meet the requirements of the thickness and gloss of the paint film.
Gravity paint spray gun: The gravity paint spray gun uses gravity to guide the paint from the pot above to the nozzle below, and then sprays it with wind. The benefit is that paint can be saved when making small repairs.
Pressure-feed paint spray gun: The pressure-feed paint spray gun supplies paint from a separate paint pressurized tank. Increasing the pressure of the pressurized tank can supply paint to several spray guns at the same time. The paint nozzle of this paint spray gun is located on the same plane as the core hole of the air cap, or slightly concave inward than the center hole of the air cap, and it is not necessary to form a negative pressure at the front end of the paint nozzle.
Internal mixing paint spray gun: There are two air supply systems in the internal mixing paint spray gun body, namely the compressed air system for mixing and atomizing the paint and the compressed air system for pressurizing the paint in the paint container. The paint supply method is: Use pressure feed.
