+8615988969750
Home / Blog / Details

May 29, 2025

How to use an airless spray gun for spraying on uneven surfaces?

Hey there! I'm a supplier of Airless Spray Gun, and I've seen firsthand how using an airless spray gun on uneven surfaces can be a real game - changer. In this blog, I'll share some tips and tricks on how to use an airless spray gun effectively on those tricky uneven surfaces.

Understanding the Basics of an Airless Spray Gun

First things first, let's quickly go over what an airless spray gun is. An airless spray gun works by pumping paint or other coatings at high pressure through a small opening in the nozzle. This creates a fine mist that can be applied evenly over a surface. The main advantage of using an airless spray gun is that it can cover large areas quickly and efficiently, and it can also penetrate into small crevices and uneven areas better than traditional brushes or rollers.

Airless Paint SprayerAirless gun

Preparing the Surface

Before you start spraying, it's crucial to prepare the uneven surface properly.

  • Clean the Surface: Remove any dirt, dust, grease, or loose paint from the surface. You can use a wire brush, sandpaper, or a pressure washer depending on the type of surface and the amount of debris. For example, if you're working on an old wooden fence with peeling paint, a wire brush can be great for scraping off the loose bits.
  • Repair Damages: Fill any cracks, holes, or dents in the surface. Use a suitable filler material like wood filler for wooden surfaces or spackle for drywall. Let the filler dry completely and then sand it down until it's smooth with the surrounding surface. This step is super important because if you don't fix these imperfections, the spray gun might not apply the coating evenly.
  • Mask Off Areas: If there are parts of the surface that you don't want to get painted, like windows, doors, or trim, use masking tape and plastic sheeting to cover them up. This will save you a lot of time and effort in cleaning up later.

Choosing the Right Nozzle

The nozzle is a key part of the airless spray gun when it comes to spraying on uneven surfaces.

  • Fan Pattern: Nozzles come in different fan patterns, such as narrow, medium, and wide. For uneven surfaces, a medium - wide fan pattern is usually a good choice. It allows you to cover a larger area with each pass while still being able to control the spray. A narrow fan pattern might be too time - consuming, and a very wide one could make it hard to focus on the details of the uneven areas.
  • Orifice Size: The orifice size of the nozzle determines the amount of paint that is sprayed. For thicker coatings or when you need to cover a lot of texture on the uneven surface, a larger orifice size is better. But if you're using a thin paint or want a more precise application, a smaller orifice size is the way to go.

Setting Up the Airless Spray Gun

Once you've got the surface prepared and the right nozzle chosen, it's time to set up the spray gun.

  • Prime the Pump: If your airless spray gun has a pump, you need to prime it to get the paint flowing. Follow the manufacturer's instructions on how to prime the pump correctly. Usually, it involves filling the paint container, attaching the suction tube, and then running the pump until the paint starts coming out of the nozzle.
  • Adjust the Pressure: The pressure setting on the spray gun is crucial. For uneven surfaces, you might need a slightly higher pressure than you would for a flat surface. This helps the paint to penetrate into the nooks and crannies. But don't go overboard with the pressure, or you might end up with a messy over - spray. Start with a lower pressure and gradually increase it until you get the right coverage.

Spraying Technique

Now, let's talk about the actual spraying technique for uneven surfaces.

  • Distance from the Surface: Keep the spray gun at a consistent distance from the surface. A good rule of thumb is to hold the gun about 8 - 12 inches away. If you get too close, the paint might build up in some areas, and if you're too far, the coverage might be patchy.
  • Overlapping Passes: Make sure to overlap each pass by about 50%. This ensures that the paint is applied evenly and there are no gaps. When you're spraying over an uneven area, you might need to make a few extra passes to make sure all the dips and bumps are covered.
  • Angle of the Spray Gun: Hold the spray gun perpendicular to the surface as much as possible. If you tilt the gun too much, the spray pattern can become uneven, and you might end up with a streaky finish.
  • Move Slowly and Steadily: Don't rush through the spraying process. Move the spray gun in a smooth, consistent motion across the surface. If you move too fast, the paint might not be applied thick enough, and if you move too slow, you could get drips.

Dealing with Specific Uneven Surfaces

Different types of uneven surfaces require different approaches.

  • Textured Walls: When spraying on textured walls, start from the top and work your way down. Pay extra attention to the peaks and valleys of the texture. You might need to make a few extra passes over the deeper valleys to ensure full coverage.
  • Wooden Furniture with Carvings: For wooden furniture with intricate carvings, use a smaller fan pattern nozzle. Hold the spray gun at an angle to get into the crevices of the carvings. You can also use a brush to touch up any areas that the spray gun might have missed.
  • Outdoor Brick or Stone Surfaces: Outdoor brick or stone surfaces are very porous and uneven. You might need to use a higher pressure setting on the spray gun and a thicker coating. Make sure to apply multiple thin coats rather than one thick coat to prevent the paint from running off the surface.

Safety Precautions

Don't forget about safety when using an airless spray gun.

  • Wear Protective Gear: Always wear safety goggles to protect your eyes from over - spray and paint particles. A respirator is also a must, especially if you're working in an enclosed area or using a paint with strong fumes. Gloves and a painting suit can protect your hands and body from the paint.
  • Ventilate the Area: If you're spraying indoors, open windows and doors to let in fresh air. If possible, use a fan to improve ventilation. Outdoor spraying is generally better because there's more natural ventilation.

After - Spraying Clean - Up

Once you're done spraying, it's important to clean the airless spray gun properly.

  • Flush the System: Use the appropriate cleaning solvent recommended by the manufacturer to flush the paint out of the spray gun, hose, and pump. This will prevent the paint from drying inside the system and clogging it up.
  • Store the Gun Properly: After cleaning, dry the gun thoroughly and store it in a cool, dry place. Make sure to follow the manufacturer's instructions on long - term storage.

Conclusion

Using an airless spray gun on uneven surfaces can seem a bit daunting at first, but with the right preparation, nozzle selection, spraying technique, and safety precautions, you can achieve a great finish. Whether you're a DIY enthusiast or a professional painter, these tips should help you make the most of your airless spray gun.

If you're interested in purchasing an airless spray gun or have any questions about our products, feel free to reach out to us. We're always happy to help you find the right solution for your spraying needs.

References

  • Painting Handbook: A Guide to Professional Painting Techniques
  • Manufacturer's Manuals for Airless Spray Guns
Send Message